Galant L4-2.4L (4G69) (2004)
STEP 3. Check the transmitter.
Replace the transmitter and register the code. Refer to Keyless Entry System, On-vehicle Service, How to register secret code.
Q : Can the transmitter be registered correctly?
YES : If the transmitter works normally, the input signal from the transmitter should be normal.
NO : Replace the ETACS-ECU. If the transmitter works normally, the input signal from the transmitter should be normal.
Inspection Procedure N-9
ETACS-ECU does not receive any interior light loaded signal.
Part 1