Galant L4-2.4L (4G69) (2004)
/Page-650904.png)
4. Measure the resistance between intermediate connector terminal 11 and ABS-ECU connector terminal 25.
OK: 2 ohms or less
5. Measure the resistance between intermediate connector terminal 12 and ABS-ECU connector terminal 7.
OK: 2 ohms or less
CAUTION: Strictly observe the specified wiring harness repair procedure. For details Service Precautions/Vehicle Damage Warnings.
Q: Do all the resistances measure 2 ohms or less?
YES: If all the resistances measure 2 ohms or less, go to Step 26.
NO: If either of the resistances measures more than 2 ohms or all the resistances measure more than 2 ohms, repair the wiring harness between
intermediate connector C-29 and the ABS-ECU connector.
