mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Recall - PCM Update for Catalytic Converter Overheating|Page 3718 > < Recall - PCM Update for Catalytic Converter Overheating|Page 3716
Page 5
background image

9.

Using a ball-point pen, enter the appropriate PCM part number, vendor number, ROM ID #, this recall bulletin number (EMR-06-003), your
dealer code, and the current date on the Engine Compartment / Control Module Label (p/n MSSF-024G-00).

10.

Carefully remove all dirt and oil from a vacant area near the VECI label on the underside of the hood, and affix the Engine Compartment label.

11.

Affix the Control Module label to the PCM.

12.

FOR VEHICLES REGISTERED IN CALIFORNIA ONLY: Complete a "VEHICLE EMISSION RECALL - PROOF OF CORRECTION" form
(p/n MSSF-106D-00). Give the completed form to the vehicle owner.

NOTE:

These forms are available from Workflow One at 1-866-980-7000.

PARTS INFORMATION

Use the Genuine Mitsubishi Parts shown.

WARRANTY INFORMATION

Claims for this campaign must be entered as recall Type "C" claims in the Mitsubishi Dealer Link (MDL).

Recall - PCM Update for Catalytic Converter Overheating|Page 3718 > < Recall - PCM Update for Catalytic Converter Overheating|Page 3716