Galant L4-2.4L (4G69) (2004)
/Page-736001.png)
Leak Detection Solenoid: Testing and Inspection
INSPECTION
EVAPORATIVE EMISSION VENTILATION SOLENOID CHECK
1. Connect a hand vacuum pump to nipple (A) of the solenoid.
2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and
without applying voltage.
3. Measure the resistance between the terminals of the solenoid.
Standard value: 17 - 21 Ohms [at 20 °C (68 °F)]
