Galant L4-2.4L (4G69) (2004)
turn.
1. Turn the rack stopper clockwise until the end of the circlip comes out of the slot in the rack housing.
2. Turn the rack stopper counterclockwise to remove the circlip.
<<G>> STEERING GEAR RACK REMOVAL
Pull out the rack slowly. Take out the rack stopper and the rack bushing at the same time.
<<H>> OIL SEAL REMOVAL
CAUTION: Do not damage oil seal press fitting surface.
Partially prize the oil seal and remove it from the rack bushing.
<<I>> STEERING GEAR PINION BEARING (BALL BEARING) REMOVAL
Use a brass bar or special tool MB990939 to remove the ball bearing from the gear housing.
<<J>> STEERING GEAR PINION SHAFT UPPER BEARING (NEEDLE ROLLER BEARING) REMOVAL
CAUTION: Do not open special tool MB991120 excessively to prevent damaging housing interior.