Galant L4-2.4L (4G69) (2004)
Stabilizer Bar: Service and Repair
Rear
The contents of this article reflect the changes called out by TSB 04-34-001
STABILIZER BAR
REMOVAL AND INSTALLATION
INSTALLATION SERVICE POINT
>>A<< STABILIZER BAR/STABILIZER BUSHING/STABILIZER BAR BRACKET INSTALLATION
1. Position the stabilizer bar identification paint to the left side.
2. Adjust the identification paint position as shown in the figure, and tighten the stabilizer bolt.
INSPECTION
^
Check the stabilizer bushings for wear and deterioration.
^
Check the stabilizer bar for deterioration or damage.
^
Check all bolts for condition and straightness.