mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

All Technical Service Bulletins for Heater Control Valve: > < Diagnosis|Page 942
Page 1
background image

Heater Control Valve: Customer Interest
ATC - Gurgling Noise

SUBJECT:

GALANT A.T.C. GURGLING NOISE
NO.

TSB-88-24-001

DATE

April, 1988

MODEL  1985-1987 Galant & 1988 Galant Sigma
PURPOSE This bulletin contains new parts information to reduce a possible gurgle noise in the automatic temperature control (A.T.C.) system of
1985-1987 Galant and 1988 Galant Sigma vehicles. The gurgle or fluttering noise is most noticeable when the temperature control lever is set between
67~F and 75~F and the vehicle interior temperature has stabilized.

FIGURE 1

The gurgle noise is caused by a vibration of the water valve linkage and rod (Figure 1) as coolant passes through the valve. The vibration and gurgle
noise can be eliminated by replacing the water valve with a new modified part (P/N MB609199). The new water valve has a spring type washer on the
blend air damper lever, which reduces the free play in the linkage.

Refer to the appropriate Service Manual for the water valve removal and replacement procedures.
EFFECTIVE PRODUCTION DATE
The new water valve has been installed in 1988 Galant Sigma vehicles from November, 1987 production.

PARTS INFORMATION

PART NAME

NEW PART NUMBER

OLD PART NUMBER

Valve, Water

MB609199

MB272293

WARRANTY INFORMATION

Normal warranty procedures apply. Obtain the labor operation code and time allowance from the Labor Operation Time Schedule.

All Technical Service Bulletins for Heater Control Valve: > < Diagnosis|Page 942