Galant V6-2972cc 3.0L SOHC (1988)
CHRONOLOGY OF CHANGES
FIGURE 3
DETAILS OF CHANGES
End Clutch Shaft - Two oil holes have been added to the end clutch shaft as shown in Figure 3 below. This change was effective from July 1987
production (from transaxle number DH5614).
FIGURE 4
End Clutch Shaft - To improve lubrication of the output flange bushing, a spiral oil groove has been added to the inner diameter of the end clutch shaft as
shown in Figure 4 below. This change was effective from August 1987 production (from transaxle number DL6587).