Galant V6-2972cc 3.0L SOHC (1988)
Shift Cable: Customer Interest
Shift Cables - Noise
NO.: TSB-88-21-016
DATE: SEPTEMBER, 88
MODEL: 1987, 88 Mirage, Galant, Sigma
SUBJECT:
KM200 SERIES SHIFT CABLE NOISE
PURPOSE
Some manual transaxle equipped vehicles with cable operated shifters may have a noise created by the shift cables vibrating while the vehicle is being
driven. This bulletin describes how to reduce the vibration.
DESCRIPTION
Normal engine and transmission operation can cause vibrations in the shift cables, which can cause noise in the passenger compartment. The vibration
may be reduced by binding the shift cables together as indicated.
PROCEDURE
Make sure that the shift cable mechanism is properly adjusted by referring to the proper Service Manual. For cable adjustment procedures for the 1987
Galant and Mirage, refer to TSB-87-21-015. Use a large plastic tie wrap to bind the shift cables together in the engine compartment as shown.
WARRANTY INFORMATION