mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Interior - Smoker's Kit|Page 9686 > < Interior - Smoker's Kit|Page 9684
Page 3
background image

4.  With the trim stick, remove the center lower panel assembly and move it away from the instrument panel. The accessory sockets will be attached. 

5.  Disconnect the wire connector from each socket, loosen and remove the nut on one of the accessory sockets, then remove that socket from the

panel. Set the removed socket aside for installation in the new lower panel. 

6.  Remove the panel assembly with the remaining accessory socket still in place from the vehicle. 

7.  Mount the new cigarette lighter socket into the lower hole on the new center lower panel/ashtray assembly from the kit. 

8.  Mount the accessory socket removed from the original panel assembly into the upper hole in the new panel. 

Interior - Smoker's Kit|Page 9686 > < Interior - Smoker's Kit|Page 9684