Galant V6-3.0L SOHC (2003)
Air Bag(s) Arming and Disarming: Vehicle Damage Warnings
INDIVIDUAL COMPONENT SERVICE
WARNING: The SRS components should not be subjected to heat over 93 °C (200 °F), so remove the SRS-ECU, air bag modules (driver's side
and front passenger's side), front seat assemblies (side air bag module), clock spring, side impact sensors before drying or baking
the vehicle after painting. Recheck the SRS system operability after reinstalling them. (Refer to Maintenance Service-SRS
Maintenance.)
If the SRS components are removed for the purpose of checking, sheet metal repair, painting, etc., they should be stored in a clean,
dry place until they are reinstalled.
If the SRS components are to be removed or replaced as a result of maintenance, diagnosis, etc., follow the appropriate procedure.(SRS-ECU: refer to
Air Bag Modules and Clock Spring: refer to Side impact sensors)
