mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2767 > < Initial Inspection and Diagnostic Overview|Page 2765
Page 101
background image

Q: Is the front power window motor (LH) normal?

YES: Go to Step 3.

NO: Replace the front power window motor (LH). When the power window main switch is operated, the front power window (LH) should
open and close normally.

STEP 3. Check power window main switch connector E-16 and front power window motor (LH) connector E-17 for loose, corroded or
damaged terminals, or terminals pushed back in the connector.

Q: Are power window main switch connector E-16 and front power window motor (LH) connector E-17 in good condition?

YES: Go to Step 4.

NO: Repair or replace the damaged component(s). Refer to Harness Connector Inspection. When the power window main switch is operated, the front
power window (LH) should open and close normally.

Initial Inspection and Diagnostic Overview|Page 2767 > < Initial Inspection and Diagnostic Overview|Page 2765