Galant V6-3.0L SOHC (2003)
STEP 41. Check the wiring harness between power window main switch connector E-16 (terminal 14) and rear power window sub-switch (RH)
connector E-09 (terminal 8).
NOTE: Also check intermediate connectors C-68, C-70 and D-07. If intermediate connector C-68, C-70 or D-07 is damaged, repair or replace the
damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between power window main switch connector E-16 (terminal 14) and rear power window sub-switch (RH) connector E-09
(terminal 8) in good condition?
YES: Go to Step 42.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. When the rear power window sub-switch (RH) is operated, the rear power window (RH) should
open or close normally.
