Galant V6-3.0L SOHC (2003)
STEP 7. Check the wiring harness between rear combination light (LH) connector F-12 (terminal 2) and front-ECU connector A-10X (terminal
8).
NOTE: Also check intermediate connectors C-66 and C-67 for loose, corroded, or damaged terminals, or terminals pushed back in the connector. If
intermediate connector C-66 or C-67 is damaged, repair or replace the damaged component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear combination light (LH) connector F-12 (terminal 2) and front-ECU connector A-10X (terminal 8) in good
condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. The taillight (LH) and the license plate lights should illuminate normally.
STEP 8. Check the stop/taillight bulb (LH).
1. Remove the stop/taillight bulb (LH).
2. Verify that the stop/taillight bulb (LH) is not damaged or burned out.
