Galant V6-3.0L SOHC (2003)
STEP 14. Check the wiring harness between rear dome light connector D-27 (terminal 1) and ETACS-ECU connector C-95 (terminal 6).
NOTE: Also check intermediate connectors C-27, D-26 and junction block connector C-78 for loose, corroded, or damaged terminals, or terminals
pushed back in the connector. If intermediate connector C-27, D-26 or junction block connector C-78 is damaged, repair or replace the damaged
component(s) as described in Harness Connector Inspection.
Q: Is the wiring harness between rear dome light connector D-27 (terminal 1) and ETACS-ECU connector C-95 (terminal 6) in good condition?
YES: No action is necessary and testing is complete.
NO: The wiring harness may be damaged or the connector(s) may have loose, corroded or damaged terminals, or terminals pushed back in the
connector. Repair the wiring harness as necessary. Verify that the rear dome lights illuminate normally.
