mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 2782 > < Initial Inspection and Diagnostic Overview|Page 2780
Page 939
background image

STEP 16. Check intermediate connector C-22 for loose, corroded or damaged terminals, or terminals pushed back in the connector.

CAUTION:  The strand end of the twisted wire should be within 10 cm (4 inches) from the connector. For details refer to Service Precautions/Vehicle
Damage Warnings.

Q: Is intermediate connector C-22 in good condition?

YES: Go to Step 17.

NO: Repair the damaged parts.

Initial Inspection and Diagnostic Overview|Page 2782 > < Initial Inspection and Diagnostic Overview|Page 2780