Galant ES L4-2350cc 2.4L SOHC MFI (1997)
4. Rear hub assembly
5. ABS rotor
Measure Distance Between Sensor Installation Surface And ABS Rotor's Toothed Surface
INSTALLATION
Reverse procedure to install, noting the following:
-
Ensure that the wheel speed sensor output voltage is checked. See: Testing and Inspection
-
The clearance between the speed sensor and the ABS rotor's toothed surface is not adjustable, but measure the distance between the sensor
installation surface and the ABS rotor's toothed surface. The standard value is 28.2 - 28.5 mm (1.11 - 1.12 inch)
