Galant ES L4-2350cc 2.4L SOHC MFI (1997)
Refrigerant: Service and Repair
Refrigerant Leak Repair
LOST CHARGE
If the system has lost all charge due to a leak:
1. Evacuate the system. (See procedure.)
2. Charge the system with approximately one pound of refrigerant.
3. Check for leaks.
4. Discharge the system.
5. Repair leaks.
6. Replace receiver drier.
CAUTION: Replacement filter-drier units must be sealed while in storage. The drier used in these units will absorb water/water vapor water
quickly upon exposure to the atmosphere. When installing a drier, have all tools and supplies ready for quick reassembly to avoid keeping the
system open any longer than necessary.
7. Evacuate and charge system.
LOW CHARGE
If the system has not lost all of its refrigerant charge; locate and repair all leaks. If it is necessary to increase the system pressure to find the leak
(because of an especially low charge) add refrigerant. If it is possible to repair the leak without discharging the refrigerant system, use the procedure
for correcting low refrigerant level.
