Galant ES L4-2350cc 2.4L SOHC MFI (1997)
3.
Clean the throttle body and intake manifold mating surfaces thoroughly.
4.
Install the new throttle body gasket.
5.
Install and temporarily finger-tighten the throttle body bolts.
6.
For proper throttle body to intake manifold alignment, lift and move the throttle body into the proper position to eliminate the incorrect gap shown
in the illustration. While holding the throttle body in the aligned position, tighten the throttle body bolts to l9 Nm (14 ft-lbs).
7.
Test drive the vehicle to make sure the hesitation and/or surging is eliminated before returning the vehicle to the customer.
PARTS INFORMATION
Part Number
Description
MD184046
Throttle Body Gasket
WARRANTY INFORMATION
Throttle Body Gasket Replacement
Nature Code: 05M
Cause Code: 450
Labor Operation No.13312110
Time Allowance: 0.6 hr.
Warranty Coverage: Emissions - 5 years/50,000 miles.
Special Warranty Information:Normal warranty procedures apply.