Galant ES L4-2350cc 2.4L SOHC MFI (1997)
Caution
1.
Never attempt to disassemble or repair the air bag module or clock spring. If faulty, replace it.
2.
Do not drop the air bag module or clock spring or allow contact with water, grease or oil. Replace it if a dent, crack, deformation or rust are
detected.
3.
The air bag modules should be stored on a flat surface and placed so that the pad surface is facing upward. Do not place anything on top of the
air bag modules.
4.
Do not expose the air bag module to temperatures over 93°C (200°F).
5.
After deployment of an air bag, replace the air bag modules. Check the clock spring. If faulty, replace it with a new part.
6.
Wear gloves and safety glasses when handling an air bag that has deployed.
7.
An undeployed air bag module should only be disposed of in accordance with the procedures specified under "Undeployed Air Bag Module
Disposal" in this manual section.
1997 3000GT, volume 1, page 52B-4