Galant ES L4-2350cc 2.4L SOHC MFI (1997)
Rectifier Diode / Bridge: Testing and Inspection
1. Inspect the (+) heat sink by checking the continuity between the (+) heat sink and stator coil lead wire connection terminal using a tester. If there is
a continuity at both, the diode is short circuited, so replace the rectifier.
2. Inspect the (-) heat sink by checking the continuity between the (-) heat sink and stator coil lead wire connection terminal using a tester.
3. Check the diode trio by connecting an ohmmeter to both ends of each diode and check the continuity of the three diodes.