Galant ES L4-2350cc 2.4L SOHC MFI (1997)
Stabilizer Link: Service and Repair
Front Suspension
NOTE: Observe the following procedure only when the dust cover is damaged during service work.
1. Remove the clip ring and the dust cover.
2. Apply multipurpose grease to the inside of the dust cover.
3. Use vinyl tape on the stabilizer link threads as shown in the illustration, and then install the dust cover to the stabilizer link.
4. Secure the dust cover by the clip ring.
NOTE: When installing the clip ring, align the ends at a 90° angle from the axis of the stabilizer link.