Galant ES L4-2350cc 2.4L SOHC MFI (1997)
Fig. 3 Washer Installation
1. Be sure to install the drive shaft washer in the specified direction.
2. Use the special tool to tighten the drive shaft nut.
CAUTION: Before securely tightening the drive shaft nuts, make sure there is no load on the wheel bearings.
3. If the position of the cotter pin holes does not match, tighten the nut up to 255 Nm (188 ft. lbs.) in maximum.
4. Install the cotter pin in the first matching holes and bend it securely.
