mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Engine Controls - Rough Idle/DTC's P0300-P0306|Page 4068 > < Engine Controls - Rough Idle/DTC's P0300-P0306|Page 4066
Page 4
background image

Check on the Warranty Superscreen to verify the engine number, and confirm whether the thermostat valve was already replaced. If not already
replaced under TSB-04-13-006 or TSB-03-13-002, replace the thermostat valve with the new parts listed in the PARTS INFORMATION section
of this bulletin. Refer to Group 14 in the appropriate service manual.

14.

For only Galant V6 vehicles produced before 11/1/00, replace the spark plugs if they have not already been replaced under TSB-02-13-015REV.
Check on the Warranty Superscreen to confirm whether they were already replaced.

CAUTION

Do not install these new spark plugs unless the PCM has already been reprogrammed. Engine damage could result, as the new spark plugs have
a higher heat range.

a.

Owners of Galant V6 vehicles produced before 11/1/00 should be given an update for their owner's manual that lists the spark plug update.
Attachment B contains the revised owner's manual information. Make copies as necessary to give to owners of these vehicles.

Engine Controls - Rough Idle/DTC's P0300-P0306|Page 4068 > < Engine Controls - Rough Idle/DTC's P0300-P0306|Page 4066