Galant ES V6-3.0L SOHC (2000)
Impact Sensor: Service and Repair
A side impact sensor is installed behind the center pillar trim on both driver and passenger sides of the vehicle.
WARNING:
1. Never attempt to disassemble or repair the side impact sensor. If faulty, replace it.
2. Do not drop or subject the side impact sensor to impact or vibration. Replace the side impact sensor, if denting, cracking, deformation,
or rust are present. Discard the old one.
3. Replace the side impact sensor after the air bag has deployed.
Pre-removal Operation
Turn the ignition switch to "OFF" position.
REMOVAL SERVICE POINT
<A> NEGATIVE (-) BATTERY CABLE DISCONNECTION