Galant LS V6-3.0L SOHC (1999)
STEP 8. Check driver's door switch connector D-21 for damage.
If harness connector D-21 (located behind the driver's door switch) is damaged, repair or replace it. Refer to Harness Connector Inspection.
If harness connector D-21 is in good condition, go to Step 9.
STEP 9. Check the harness wires between driver's door switch connector D-21 and ETACS-ECU connector C-86.
If the harness wires between the driver's door switch and ETACS-ECU are damaged, repair them. Then check that the malfunction is eliminated.
If the harness wires are in good condition, go to Step 10.