mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Cowl Area - Wind Noise|Page 6731 > < Cowl Area - Wind Noise
Page 2
background image

3.

Open the front door. Apply a bead of clear RTV silicone sealant along the bottom edge of both the upper and tower door hinges.

NOTE:  

Fender was removed in photo for clarity. Fender removal is not required for repair procedure.

4.

If necessary, repeat Steps 1 through 3 on the other side of the vehicle.

5.

Test drive the vehicle to confirm the wind noise is eliminated.

WARRANTY INFORMATION

Cowl Area - Wind Noise|Page 6731 > < Cowl Area - Wind Noise