Galant LS V6-3.0L SOHC (1999)
1. Apply soapy water to the contact surface of the bushing when press-fitted the bushing.
2. The bushing should be press-fitted so that the inner pipe projection is at the standard length.
Standard values
Bushing A: 9.0 ± 1.0 mm (0.35 ± 0.04 inch)
Bushing B: 4.0 ± 1.0 mm (0.16 ± 0.04 inch)
CROSSMEMBER BUSHING C
1. Use the special tool to drive out and press-fit the crossmember bushing C.
2. The bushing should be press-fitted so that the inner pipe projection is at the standard length.
Standard value (A): 4.0 ± 0.5 mm (0.16 ± 0.02 inch)
