Galant LS V6-3.0L SOHC (1999)
Protect the caliper body with a shop towel. Blow compressed air through the brake hose to remove the piston boot and piston.
<B> PISTON SEAL REMOVAL
CAUTION: Do not use a flat-tipped screwdriver or similar tool to remove piston seal. These may damage the inner side of the cylinder.
1. Remove the piston seal with your finger tip.
2. Clean the piston surface and inner cylinder with alcohol or brake fluid DOT 3 or DOT 4.
ASSEMBLY
Assembly Service Point
>A< LOCK PIN/GUIDE PIN INSTALLATION
Install the lock pin and guide pin to the caliper body as shown in the illustration.
Removal/Installation
