Galant LS V6-3.0L SOHC (1999)
Brake Caliper: Service and Repair
Rear
Replacement
REMOVAL AND INSTALLATION
Installation Service Point
>A< REAR BRAKE ASSEMBLY INSTALLATION
1. In order to measure brake drag torque after pad installation, measure hub torque with the pads removed.
Use a spring scale to measure hub torque in the direction shown. Record the value.
CAUTION: Do not let any oil, grease or other contamination get onto the friction surfaces of the pads and brake discs.
2. After re-installing the caliper support, install the pad clips and pads to the caliper support.