Galant LS V6-3.0L SOHC (1999)
disc.
Standard value: 24.0 mm (0.9 inch)
Minimum limit: 22.4 mm (0.88 inch)
Thickness variation (at least 8 positions) should not be more than 0.015 mm (0.0006 inch).
3. If the disc thick is less than 22.4 mm (0.88 inch) thick, replace it with a new one. If thickness variation exceeds the specification, turn rotor with
an on-the-car type brake lathe ("Accuturn-8750" or equivalent).
If the calculated final thickness after turning the rotor is less than the standard value, replace the disc.
<Rear>
1. Remove dirt and rust from the brake disc surface.
2. Measure the disc thickness at four positions or more.
Standard value: 10.0 mm (0.4 inch)
Minimum limit: 8.4 mm (0.33 inch)
Thickness variations (at least 4 positions) should not be more than 0.015 mm (0.0006 inch).
3. If the disc is less than 8.4 mm (0.33 inch) thick, replace it with a new one. If thickness variation exceeds the specification, turn rotor with an
on-the-car brake lathe ("Accuturn-8750" or equivalent).
If the calculated final thickness is less than the standard value, replace the disc.
