Galant LS V6-3.0L SOHC (1999)
After making mating marks on the radiator hose and hose clamp, disconnect the radiator hose.
INSTALLATION SERVICE POINTS
>A< WATER OUTLET FITTING / THERMOSTAT CASE ASSEMBLY INSTALLATION
Squeeze out MITSUBISHI GENUINE Part number MD970389 or equivalent from the fitting and case, and apply a continuous bead of
MITSUBISHI GENUINE Part number MD970389 or equivalent.
>B< RADIATOR UPPER / LOWER HOSE CONNECTION
1. Insert each hose as far as the projection of the water outlet fitting.
2. Align the mating marks on the radiator hose and hose clamp, and then connect the radiator hose.
>C< O-RING INSTALLATION
CAUTION: Do not allow engine oil or other grease to adhere to the O-ring.
Insert the O-ring to the water pipe, and coat the outer portion of the O-ring with water or engine coolant.
INSPECTION
WATER PIPE AND HOSE CHECK
Check the water pipe and hose for cracks, damage and clogs. Replace them if necessary.