mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

ABOUT US
Engine Control Module > < Communication With Scan Tool Is Not Possible (All Systems)|Page 2911

Galant LS V6-3.0L SOHC (1999)

Page 3
background image

STEP 2.

Check harness connector C-41 at the PCM for damage.
If harness connector C-41 is damaged, repair or replace it.
Refer to Harness Connector Inspection >.
If harness connector C-41 is normal, refer to INSPECTION PROCEDURE 29 - Power Supply and Ignition Switch-IG System.
Then confirm that the malfunction symptom is eliminated.

Engine Control Module > < Communication With Scan Tool Is Not Possible (All Systems)|Page 2911