mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3013 > < Initial Inspection and Diagnostic Overview|Page 3011
Page 26
background image

STEP 6. Check the ETACS-ECU connector C-86 and rear door lock actuator (LH) connector E-11 for damage.

If the ETACS-ECU connector C-86 and rear door lock actuator (LH) connector E-11 are damaged, repair or replace them. Refer to Harness Connector
Inspection.

All doors should be locked or unlocked.

If the connectors are in good condition, go to Step 7.

Initial Inspection and Diagnostic Overview|Page 3013 > < Initial Inspection and Diagnostic Overview|Page 3011