Galant LS V6-3.0L SOHC (1999)
If the connector is in good condition, go to Step 10.
STEP 10. Check the harness wires between horn relay connector A-15X and fusible link (1).
NOTE: After checking junction block connectors C-85 and C-77 and intermediate connector C-66, check the wires. If junction block connectors C-85
and C-77 and intermediate connector C-66 are damaged, repair or replace them. Refer to Harness Connector Inspection.
If the harness wires between horn relay connector A-15X and fusible link (1) are damaged, repair them.