mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3033 > < Initial Inspection and Diagnostic Overview|Page 3031
Page 46
background image

The answerback function should work normally.

STEP 11. Check the horn relay connector A-15X and ETACS-ECU connector C-81 for damage.

If the horn relay connector A-15X and ETACS-ECU connector C-81 are damaged, repair or replace them. Refer to Harness Connector Inspection.

The answerback function should work normally.

If the connectors are in good condition, go to Step 12.

Initial Inspection and Diagnostic Overview|Page 3033 > < Initial Inspection and Diagnostic Overview|Page 3031