Galant LS V6-3.0L SOHC (1999)
STEP 8. Check the harness wires between front-ECU connector A-09X and ignition switch (ACC).
NOTE: After checking intermediate connector C-66 and junction block connectors C-73, C-87 <1999 models> and C-77 <2000 models>, check the
wires. If intermediate connector C-66 and junction block connectors C-73, C-87 <1999 models> and C-77 <2000 models> are damaged, repair or
replace them. Refer to Harness Connector Inspection.
If the harness wires between front-ECU connector A-09X and ignition switch (ACC) are damaged, repair them.
The windshield wiper should work normally.
Inspection Procedure F-2
