mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3075 > < Initial Inspection and Diagnostic Overview|Page 3073
Page 88
background image

STEP 7. Check the headlight relay (low) connector A-08X and front-ECU connector A-09X for damage.

If the headlight relay (low) connector A-08X and front-ECU connector are damaged, repair or replace them. Refer to Harness Connector Inspection.

The headlights (low-beam) should illuminate.

If the connectors are in good condition, go to Step 8.

STEP 8. Check the harness wire between headlight relay (low) connector A-08X and front-ECU connector A-09X.

If the harness wire between headlight relay (low) connector A-08X and front-ECU connector A-09X is damaged, repair it.

The headlights (low-beam) should illuminate.

If the harness wire is in good condition, go to Step 9.

STEP 9. Check the headlight connectors A-27 and A-32 for damage.

If the headlight connectors A-27 and A-32 are damaged, repair or replace them. Refer to Harness Connector Inspection.

The headlights (low-beam) should illuminate.

If the connectors are in good condition, go to Step 10.

Initial Inspection and Diagnostic Overview|Page 3075 > < Initial Inspection and Diagnostic Overview|Page 3073