mitsubishi Workshop Repair Guides

Mitsubishi Workshop Service and Repair Manuals

Initial Inspection and Diagnostic Overview|Page 3076 > < Initial Inspection and Diagnostic Overview|Page 3074
Page 89
background image

STEP 10. Check the harness wires between headlight relay (low) connector A-08X and headlight connectors A-27 and A-32.

NOTE:  After checking intermediate connector C-05, check the wires. If intermediate connector C-05 is damaged, repair or replace it. Refer to Harness
Connector Inspection.

If the harness wires between headlight relay (low) connector A-08X and headlight connectors A-27 and A-32 are damaged, repair them.

The headlights (low-beam) should illuminate.

If the harness wires are in good condition, replace the front-ECU.

The headlights (low-beam) should illuminate.

Inspection Procedure I-3

Initial Inspection and Diagnostic Overview|Page 3076 > < Initial Inspection and Diagnostic Overview|Page 3074