Galant LS V6-3.0L SOHC (1999)
STEP 9. Check the headlight connectors A-27 and A-32 for damage.
If the headlight connectors A-27 and A-32 are damaged, repair or replace them. Refer to Harness Connector Inspection.
The headlights (high-beam) should illuminate normally.
If the connectors are in good condition, go to Step 10.
STEP 10. Check the harness wires between headlight relay (high) connector A-07X and headlight connectors A-27 and A-32.
NOTE: After checking intermediate connector C-05, check the wires. If intermediate connector C-05 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between headlight relay (high) connector A-07X and headlight connectors A-27 and A-32 are damaged, repair them.
The headlights (high-beam) should illuminate normally.
If the harness wires are in good condition, replace the front-ECU.
The headlights (high-beam) should illuminate normally.
