Galant LS V6-3.0L SOHC (1999)
STEP 6. Check the harness wire between key reminder switch connector C-59 and ETACS-ECU connector C-82.
If the harness wire between key reminder switch connector 0-59 and ETACS-ECU connector C-82 is damaged, repair it.
The key reminder switch input signal should be able to be checked and the functions, which are described in the "Technical Description (comment)",
should work normally.
If the harness wire is in good condition, replace the ETACS-ECU.
The key reminder switch input signal should be able to be checked and the functions, which are described in the "Technical Description (comment)",
should work normally.
Inspection Procedure N-4
Hazard Warning Light Switch Input Circuit
CIRCUIT OPERATION
The ETACS-ECU operates various functions according to the input signal from the hazard warning light switch.
