Galant LS V6-3.0L SOHC (1999)
STEP 3. Check the hazard warning light switch connector C-07 for damage.
If the hazard warning light switch connector C-07 is damaged, repair or replace it. Refer to Harness Connector Inspection.
The hazard warning light switch input signal should be able to be checked and the tunctions, which are described in the "Technical Description
(comment)," should work normally.
If the connector is in good condition, go to Step 4.
STEP 4. Check the harness wire between hazard warning light switch connector C-07 and ground.
If the harness wire between hazard warning light switch connector C-07 and ground is damaged, repair it.
The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical Description
(comment)," should work normally.
STEP 5. Check the hazard warning light switch connector C-07 and ETACS-ECU connector C-82 for damage.
If the hazard warning light switch connector C-07 and ETACS-ECU connector C-82 are damaged, repair or replace them. Refer to Harness Connector
Inspection. The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
