Galant LS V6-3.0L SOHC (1999)
If the connectors are in good condition, go to Step 6.
STEP 6. Check the harness wire between hazard warning light switch connector C-07 and ETACS-ECU connector C-82
If the harness wire between hazard warning light switch connector C-07 and ETACS-ECU connector C-82 is damaged, repair it.
The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical Description
(comment)," should work normally.
If the harness wire is in good condition, replace the ETACS-ECU.
The hazard warning light switch input signal should be able to be checked and the functions, which are described in the "Technical Description
(comment)," should work normally.
Inspection Procedure N-5