Galant LS V6-3.0L SOHC (1999)
STEP 20. Check the rear door switch (RH) connector F-08 and ETACS-ECU connector C-86 for damage.
If the rear door switch (RH) connector F-08 and ETACS-ECU connector C-86 are damaged, repair or replace them. Refer to Harness Connector
Inspection.
The rear door switch (RH) input signal should be able to be checked and the functions, which are described in the "Technical Description (comment),"
should work normally.
If the connectors are in good condition, go to Step 21.
