Galant LS V6-3.0L SOHC (1999)
STEP 3. Check driver's door lock actuator switch connector E-15 for damage.
If driver's door lock actuator switch connector E-15 is damaged, repair or replace it. Refer to Harness Connector Inspection.
The input signal from the driver's door lock actuator switch should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
If the connector is in good condition, go to Step 4.
STEP 4. Check the harness wires between driver's door lock actuator switch connector E-15 and ground.
NOTE: After checking intermediate connector C-68, check the wires. If intermediate connector C-68 is damaged, repair or replace it. Refer to Harness
Connector Inspection.
If the harness wires between driver's door lock actuator switch connector E-15 and ground are damaged, repair them.
The input signal from the driver's door lock actuator switch should be able to be checked and the functions, which are described in the "Technical
Description (comment)," should work normally.
STEP 5. Check the driver's door lock actuator switch connector E-15 and ETACS-ECU connector C-81 for damage.
