Galant LS V6-3.0L SOHC (1999)
Connector Inspection.
If the harness wires between power window sub switch connector E-05 and ground, repair them.
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
STEP 10. Check the power window sub switch connector E-05 and ETACS-ECU connector C-81 for damage.
If the power window sub switch connector E-05 and ETACS-ECU connector C-81 are damaged, repair or replace them. Refer to Harness Connector
Inspection.
The door lock switch input signal should be able to be checked and the central door locking system should work normally.
If the connectors are in good condition, go to Step 11.