Galant LS V6-3.0L SOHC (1999)
STEP 2. Check the windshield wiper and windshield washer switch.
If the windshield wiper and windshield washer switch is damaged, replace it.
The input signal from the column switch (windshield wiper and washer switch) should be able to be checked and the windshield wiper and washer should
work normally.
If the windshield wiper and windshield washer switch is in good condition, replace the column switch or ETACS-ECU. The input signal from the column
switch (windshield wiper and washer switch) should be able to be checked and the windshield wiper and washer should work normally.
Inspection Procedure N-16
Windshield Intermittent Wiper Intervals Adjusting Knob Input Circuit
CIRCUIT OPERATION
The ETACS-ECU calculates the windshield intermittent wiper interval according to the resistance of the windshield intermittent wiper interval adjusting
knob, which is incorporated in the column switch (windshield wiper and windshield washer switch).
