Galant LS V6-3.0L SOHC (1999)
Ignition Control Module: Testing and Inspection
IGNITION COIL AND IGNITION POWER TRANSISTOR
Required Special Tool:
MB991348: Test Harness Set
Measurement Method
1. Disconnect the connector, and connect test harness special tool, (MB991348), in between. (All terminals should be connected.)
Observation Conditions
2. Connect the oscilloscope probe to distributor connector terminal 3.
Alternate method Crest harness not available)
1. Connect the oscilloscope probe to PCM terminal 11.
Standard Wave Pattern
Observation Conditions
Observation conditions
