Galant LS V6-3.0L SOHC (1999)
5. This will be displayed when the key ID registration is successful.
If an error occurs during key ID registration, the message "Can't execute" will be displayed. If the key has already been registered, "Key ID has
been registered" will be displayed.
6. The number of keys currently registered will be displayed. To register an additional key, replace the ignition key with the next key to be registered
within five seconds and then press the "YES" key.
Press the "YES" key. Key ID registration screen will be displayed, then register another key.
NOTE: A maximum of eight different keys can be registered.
7. If key ID registration is complete, press the "NO" key.
Password Set
1. Enter the password.
Use the "UP" and "DOWN" keys to change the current password digit to a value between 0 and 9.
Use the "LEFT" and "RIGHT" keys to move to a different password digit.
Press the "YES" key to accept the password.
NOTE: Four separate digits must be input to make up the password.
