Galant LS V6-3.0L SOHC (1999)
Clockspring Assembly / Spiral Cable: Service and Repair
WARNING:
1. Never attempt to disassemble or repair the air bag modules or clock spring. If faulty, replace it.
2. Do not drop the air bag modules or clock the clock spring with a new one. Spring or allow contact with water, grease or oil. Replace it if a
dent, crack, deformation or rust is detected.
3. The air bag modules should be stored on a flat surface and placed so that the only be disposed of in accordance with pad surface is facing
upward. Do not the procedures. place anything on top of it.
4. Do not expose the air bag modules to temperatures over 93° C (200° F).
5. After deployment of an air bag, replace the clock spring with a new one.
6. Wear gloves and safety glasses when handling air bags that have already deployed.
7. An undeployed air bag module should only be disposed of in accordance with the procedures.
Required Special Tool:
MB990502: Scan Tool (MUT-II)
MB990803: Steering Wheel Puller
MB991613: SRS Check Harness
Pre-removal Operation
after setting the steering wheel and front wheels to the straight ahead position, remove the ignition key.
REMOVAL SERVICE POINT
